|EnerFlow™ 20 is a Completely New Additive Package for Bulk Treatment of blended Biodiesel’s between B1 and B50.Proprietary Formulation based on proven technologies.Twin technologies treat both biofuel and petro-diesel components of biodiesel.Provides Excellent Cold Weather Protection for Both Components (Petro-Diesel and Bio-Diesel) of blended Biodiesel. Provides significant CFPP improvement, lowering it between 15F and 30F.Provides dramatically increased stability for Biodiesel.Slows oxidation and breakdown of blended biofuels.Draws out and disperses water held in the fuel.Inhibits bacterial and fungal growth in Biodiesel without use of pesticides.”A” Rated Corrosion Inhibitor to Reduce Engine and Storage Tank Corrosion.Reduces or eliminates formation of Gums, Varnishes, and Carbon in the fuel system.Dramatically Slows Sludge Formation in Engine Oil.
Features and Benefits:
Treats US Gallons
|32 oz. 12/case||11205||250 (per container)|
|1 US Gallon 4/case||11206||1,000 (per container)|
|5 US Gallons||11207||5.000|
|55 US Gallons||11209||55,000|
|Storage and Blending:Needs to be stored above 40°F.If stored below 40°F, allow product to warm up to least 60°F before use.Blending should take place with B1 – B50 (includes B2, B5, B10, B20, etc.) fuel at or above 60°F.NOTE: (Blending below 60°F may result in incomplete blending, performance less than described, and or possible product separation).
Use all appropriate safety measures and extreme caution in blending at these temperatures.
For more information please consult the Material Safety Data Sheet for this product.
All used and unused product and its containers should be disposed of in accordance with all local, state, and federal regulations.
Notice to Purchaser:
Enertech Labs, Inc. provides no warranty of any kind with respect to the product whether express or implied including without limitation, the implied warranty of merchantability or fitness for any intended use or purpose; shall not be liable under any circumstances for any loss, damage, liability, injury or expense directly or indirectly resulting from, arising or related to the use or application of product; shall not be liable for consequential or incidental damages or loss of profits; and its liability shall be limited to replacement of the product.